SSP380 type grinding and polishing machine-Fiberlink (Wuhan) Photoelectric Technology-Optoelectronic development

1. Size of grinding disc	Φ380mm
2. Fixture specification	4 inch fixture
3. Diameter of carrier plate	D106mm
4. Number of stations	Two
5. Speed of polishing disc	2-99rpm
6. Speed of gear hook	5-99rpm
7. Swing speed	0-20spm
8. Total power	3kW、AC200V、50HZ
9. Table processing	Teflon
10. Mode of supply	peristaltic pump

Basic configuration

1. Main motor	Delta Servo
2. Swing motor	Delta Servo
3. Repair disc motor	Delta Servo
4. cpu unit	Siemens
5. Touch screen	Taiwan vinylon
6. screw rod	Taiwan silver
7. Low-voltage electrical appliances	Schneider, Mingwei, OMORN
8. Bearing	NSK

HY-SSP380型磨抛机（中文版）.pdf

Key words:

SSP380 type grinding and polishing machine

Related Products

Narrow Linewidth Laser Source (1 MHz200KHz)

The narrow linewidth laser module adopts the imported butterfly pump laser, combined with the professional design of the laser drive circuit and TEC control circuit to ensure the safe and stable operation of the laser. This laser can be used in scientific research, production testing and other fields. It is an ideal light source for optical fiber sensing and laser radar. It can provide various module packages according to customer requirements.

HY-EAS Series EA Modulated Laser Source

HY-EAS series EA modulated laser light source integrates the functions of DFB laser and EA modulator. It has the characteristics of low chirp, low driving voltage (Vpp:2~3V), low power consumption and high modulation efficiency. It is widely used in high-speed optical fiber communication systems such as 10Gbps and 40Gbps and microwave photonics.

HY-DS521 SLD desktop light source

Superluminescent light emitting diode (SLD) high bias, dual output desktop light source, the output power is not higher than 3mW. Built-in microcomputer to implement safety monitoring, using high-precision constant current source design and high-precision pulse width modulation (PWM) precision temperature control technology. The output optical power and spectrum are stable, the production process control and test process are strict, and the long-term stability is better than 2%(8hr). It is suitable for photoelectric detection and experiment in production line, test line, laboratory and other application conditions.

HY-DS511 SLD desktop light source

Super luminescent diode (SLD) low bias, dual output desktop light source, the output power is not higher than 3mW. Built-in microcomputer to implement safety monitoring, using high-precision constant current source design and high-precision pulse width modulation (PWM) precision temperature control technology. The output optical power and spectrum are stable, the production process control and test process are strict, and the long-term stability is better than 2%(8hr). It is suitable for photoelectric detection and experiment in production line, test line, laboratory and other application conditions.

HY-DS501 SLD desktop light source

Super luminescent diode (SLD) single output desktop light source, the output power is not higher than 3mW. Built-in microcomputer to implement safety monitoring, using high-precision constant current source design and high-precision pulse width modulation (PWM) precision temperature control technology. The output optical power and spectrum are stable, the production process control and test process are strict, and the long-term stability is better than 2%(8hr). It is suitable for photoelectric detection and experiment in production line, test line, laboratory and other application conditions.

HY-DS321 SLD desktop light source

HY-DS311 SLD desktop light source

HY-DS301 SLD desktop light source

DFB laser source (1064nm)

DFB laser module adopts imported butterfly pump laser, combined with the professional design of the laser drive circuit and TEC control circuit to ensure the safe and stable operation of the laser. This laser can be used in scientific research, production testing and other fields. It is an ideal light source for optical fiber sensing and optical device testing. It can provide various module packages according to customer requirements.

DFB laser source (1MHz)

ASE broadband light source (1.0um)

The ASE broadband light source module adopts high-performance ytterbium-doped fiber, combined with optimized optical path structure design and stable laser drive to ensure long-term stable and reliable operation of the light source; it is suitable for applications such as optical fiber sensing and passive device testing. Support PC monitoring, real-time monitoring/configuration module running status.

Narrow Pulse Butterfly Laser Driver

The maximum pulse peak current that the drive can provide is ≈ 2A, which may damage the drive. So don't try a peak current higher than 2A. The maximum pulse peak current that the laser can withstand is different, and the proportional relationship between the pulse width and the repetition frequency is relatively large. Usually, when the repetition frequency is low and the pulse width is narrow, the peak current that can be tolerated is greater.

Ultra-narrow linewidth (1KHz) single frequency fiber laser

The laser adopts a proprietary traveling wave cavity design, with a unique frequency stabilization technology, so that the laser maintains a single longitudinal mode, ultra-low relative intensity noise and phase noise high-performance stable output, the module adopts a proprietary shockproof noise reduction design, with stable low noise control circuit, to ensure the high performance and stable operation of the laser.

HY-NLS Series Narrow Linewidth Fiber Laser Modules

The HY-NLS series narrow linewidth fiber laser module adopts high-performance distributed feedback resonator and packaging technology. The laser output guarantees a stable single longitudinal mode, the linewidth is less than 3KHz, and the output power is> 10mW. It is suitable for distributed optical fiber sensing, interference sensing, coherent optical communication, laser radar and other fields.

HY-DML Series 1310nm High Bandwidth Direct-adjustable Light Source

HY-DML series 1310nm high bandwidth direct dimming source integrates 1310nm direct modulation DFB laser, drive circuit and temperature control circuit. The light source has 10GHz high modulation bandwidth, excellent mode stability, low relative intensity noise and good output optical power stability. The high bandwidth and high sensitivity of RF signal modulation make HY-ELD-13 products the best choice for analog RF signal direct modulation light sources.

ELD Series 905nm Direct-modulation Light Source Module

The HY-ELD direct modulation laser module integrates high power laser diode, driving circuit and temperature control circuit. The module has 20Mbit/s modulation rate, excellent mode stability, low relative intensity noise and good output optical power stability. It can be used in the field of space optical communication and digital communication.

DML Series 1550nm High Bandwidth Directly Modulation Laser Module

HY-DML series 1550nm analog broadband direct modulation laser module adopts highly linear microwave direct modulation DFB laser (DML), fully transparent working mode, without RF drive amplifier, and integrates automatic power control (APC) and automatic temperature control (ATC) circuits, ensuring that the laser can transmit microwave RF signals up to 18GHz with long distance, high bandwidth and flat response, provides superior performance linear fiber optic communications for a variety of analog broadband microwave applications. Due to avoid the use of expensive coaxial cable or waveguide, the transmission distance limit is canceled, greatly improving the signal quality and reliability of microwave communication, can be widely used in long-range wireless, timing and reference signal distribution, telemetry and delay line microwave communication field.

HY-PLS Series Nanosecond Pulse Light Source

The HY-PLS series pulse light source uses a unique short pulse drive circuit to achieve the narrowest pulse output of up to 3ns. At the same time, it uses a high-stability laser and a unique APC (automatic power control) and ATC (automatic temperature control) circuit to make the output power and wavelength have a high degree of stability, and can monitor the light source temperature, power and other information in real time. This series of pulse light source is mainly used for MOPA structure fiber laser seed source, spectral analysis, fiber sensing, passive device testing.

HY-PLS Series 905nm Pulse Light Source

HY-PLS series pulse light source uses a unique short pulse drive circuit to achieve pulse output, laser unique APC (automatic power control) and ATC (automatic temperature control) circuit, so that the output power and wavelength has a high degree of stability.

HY-PLS-08 type 850nm nanosecond pulse light source

HY-PLS series 850nm nanosecond pulse light source uses a unique short pulse drive circuit to achieve the narrowest pulse output of up to 3ns. At the same time, it uses a highly stable laser and unique APC (automatic power control) and ATC (automatic temperature control) circuits to make the output power and wavelength have high stability, and can monitor the light source temperature, power and other information in real time. This series of pulse light source is mainly used for MOPA structure fiber laser seed source, spectral analysis, fiber sensing, passive device testing.

Message consultation

We will surprise you with a gift as soon as we receive your message.

Cookie

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

Cookie

Required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

Analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

Advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

WhatsApp

Inquiry

Inquiry

Tel

Tel13007196908

E-mail

E-mailsales@fiberlink.com.cn

Contact Information

Contact Phone

+86 13007196908

E-mail: sales@fiberlink.com.cn

Address: Building 1, No. 12 Miaoshan East Road, Jiangxia District, Wuhan, Hubei Province, 430073 P.R China