WhatsApp
WhatsApp sales@fiberlink.com.cn

Products

Product Center

Contact Information

+
  • HY-8~2500MHz模拟光接收模块​2.png

HY-8 MHz ~ 2500MHz Analog Optical Receiving Module

Classification:

Optical receiving module

HY-8 ~ 2500MHz analog optical receiver module uses high linear PIN detector to realize the conversion of optical signal to analog signal, which is mainly used in mobile antenna, microwave delay line, satellite ground station, radio frequency signal long-distance transmission and other fields.

Contact：

Cheryl Chen
Cheryl Chen
Cheryl Chen
Cheryl Chen
Fiberlink_Cheryl
Fiberlink_Cheryl
Inquiry
Message
  • Overview
  • Selection List
  • Product Information(PDF)

    HY-8 ~ 2500MHz analog optical receiver module uses high linear PIN detector to realize the conversion of optical signal to analog signal, which is mainly used in mobile antenna, microwave delay line, satellite ground station, radio frequency signal long-distance transmission and other fields.

     

    Main Features Features

    High linearity

    Wide bandwidth 8~2500MHz

    No signal format restrictions, transparent transmission

    High sensitivity

    Low power consumption

    Good resistance to electromagnetic interference

     

    Application field Applications

    Mobile antenna

    microwave delay line

    satellite earth station

    long-distance transmission of radio frequency signal

     

     

    Performance parameters:

    Parameters

    Unit

    Minimum

    Typical value

    Maximum

    Remarks

    optical characteristics

    Detector Type

     

    PIN

     

    Working wavelength

    nm

    1100

     

    1700

     

    Responsiveness

    A/W

    0.85

    0.9

     

     

    optical return loss

    dB

    50

     

     

     

    Fiber type

     

    SMF-28E

     

    fiber optic connector

     

    SC/APC

     

    RF Characteristics

    Operating frequency

    MHz

    8

     

    2500

     

    In-band flatness

    dB

    -1.0

     

    1.0

     

    standing wave ratio

     

     

     

    1.5

     

    IM3

    (dB)

    -65

     

     

     

    HUM

    (dB)

    -60

     

    -70

     

    input impedance

    Ω

     

    50

     

     

    RF Connector

     

    SMA-F

     

    Power supply

    Power supply

    DC

    V

     

    12

     

     

    Power consumption

    W

     

     

    5

    Single power supply operation

     

    Limit conditions:

    Parameters

    Unit

    Minimum

    Typical value

    Maximum

    Remarks

    Input optical power

    dBm

     

     

    10

     

    Operating voltage

    V

     

     

    13

     

    Working temperature

    ℃

    -40

     

    -65

     

    Storage temperature

    ℃

    -40

     

    85

     

    Working relative humidity

    %

    5

     

    95

     

     

    Ordering information:

    HY-DML

    XX

    XX

    X

    XX

    X

    Direct Modulation Optical Emission Module

    Operating wavelength:

    13-1310nm

    15-1550nm

    Modulation bandwidth:

    02---8~2500MHz

    Encapsulation:

    M --- Module

    D --- desktop

    Output coupling:

    DC--DC coupling

    AC--AC coupling

    Fiber optic connectors:

    FP---FC/PC

    FA---FC/APC

    SP --- user specified

    * If you have special requirements, please contact our sales staff

  • Products

    Model

    PD

    Modulation bandwidth:

    Encapsulation:

    RF Connectors:

    Output coupling:

    Fiber optic connectors:

    HY-PD Series Analog Broadband Optical Receiving Module

    analog broadband optical receiver module

    PD---PD without magnification

    06G---06GHz

    10G---10GHz

    18G---18GHz

    M --- Module

    S--SMA type

    K--K type

    DC--DC coupling

    AC--AC coupling

    FP---FC/PC

    FA---FC/APC

    SP --- user specified

    Products

    Model

    Operating wavelength:

    Modulation bandwidth:

    Encapsulation:

    Output coupling:

    Fiber optic connectors:

    HY-8 MHz ~ 2500MHz Analog Optical Receiving Module​

    Direct Modulation Optical Emission Module

    1310nm

    1550nm

    8~2500MHz

    Module

    Desktop

    DC--DC coupling

    AC--AC coupling

    FP---FC/PC

    FA---FC/APC

    SP --- user specified

HY-8~2500MHz模拟光接收模块​（中文版）.pdf

Key words:

HY-8 MHz ~ 2500MHz Analog Optical Receiving Module

Related Products

Narrow Linewidth Laser Source (1 MHz200KHz)

Narrow Linewidth Laser Source (1 MHz200KHz)

The narrow linewidth laser module adopts the imported butterfly pump laser, combined with the professional design of the laser drive circuit and TEC control circuit to ensure the safe and stable operation of the laser. This laser can be used in scientific research, production testing and other fields. It is an ideal light source for optical fiber sensing and laser radar. It can provide various module packages according to customer requirements.

HY-EAS Series EA Modulated Laser Source

HY-EAS Series EA Modulated Laser Source

HY-EAS series EA modulated laser light source integrates the functions of DFB laser and EA modulator. It has the characteristics of low chirp, low driving voltage (Vpp:2~3V), low power consumption and high modulation efficiency. It is widely used in high-speed optical fiber communication systems such as 10Gbps and 40Gbps and microwave photonics.

HY-DS521 SLD desktop light source

HY-DS521 SLD desktop light source

Superluminescent light emitting diode (SLD) high bias, dual output desktop light source, the output power is not higher than 3mW. Built-in microcomputer to implement safety monitoring, using high-precision constant current source design and high-precision pulse width modulation (PWM) precision temperature control technology. The output optical power and spectrum are stable, the production process control and test process are strict, and the long-term stability is better than 2%(8hr). It is suitable for photoelectric detection and experiment in production line, test line, laboratory and other application conditions.

HY-DS511 SLD desktop light source

HY-DS511 SLD desktop light source

Super luminescent diode (SLD) low bias, dual output desktop light source, the output power is not higher than 3mW. Built-in microcomputer to implement safety monitoring, using high-precision constant current source design and high-precision pulse width modulation (PWM) precision temperature control technology. The output optical power and spectrum are stable, the production process control and test process are strict, and the long-term stability is better than 2%(8hr). It is suitable for photoelectric detection and experiment in production line, test line, laboratory and other application conditions.

HY-DS501 SLD desktop light source

HY-DS501 SLD desktop light source

Super luminescent diode (SLD) single output desktop light source, the output power is not higher than 3mW. Built-in microcomputer to implement safety monitoring, using high-precision constant current source design and high-precision pulse width modulation (PWM) precision temperature control technology. The output optical power and spectrum are stable, the production process control and test process are strict, and the long-term stability is better than 2%(8hr). It is suitable for photoelectric detection and experiment in production line, test line, laboratory and other application conditions.

HY-DS321 SLD desktop light source

HY-DS321 SLD desktop light source

Superluminescent light emitting diode (SLD) high bias, dual output desktop light source, the output power is not higher than 3mW. Built-in microcomputer to implement safety monitoring, using high-precision constant current source design and high-precision pulse width modulation (PWM) precision temperature control technology. The output optical power and spectrum are stable, the production process control and test process are strict, and the long-term stability is better than 2%(8hr). It is suitable for photoelectric detection and experiment in production line, test line, laboratory and other application conditions.

HY-DS311 SLD desktop light source

HY-DS311 SLD desktop light source

Super luminescent diode (SLD) low bias, dual output desktop light source, the output power is not higher than 3mW. Built-in microcomputer to implement safety monitoring, using high-precision constant current source design and high-precision pulse width modulation (PWM) precision temperature control technology. The output optical power and spectrum are stable, the production process control and test process are strict, and the long-term stability is better than 2%(8hr). It is suitable for photoelectric detection and experiment in production line, test line, laboratory and other application conditions.

HY-DS301 SLD desktop light source

HY-DS301 SLD desktop light source

Super luminescent diode (SLD) single output desktop light source, the output power is not higher than 3mW. Built-in microcomputer to implement safety monitoring, using high-precision constant current source design and high-precision pulse width modulation (PWM) precision temperature control technology. The output optical power and spectrum are stable, the production process control and test process are strict, and the long-term stability is better than 2%(8hr). It is suitable for photoelectric detection and experiment in production line, test line, laboratory and other application conditions.

DFB laser source (1064nm)

DFB laser source (1064nm)

DFB laser module adopts imported butterfly pump laser, combined with the professional design of the laser drive circuit and TEC control circuit to ensure the safe and stable operation of the laser. This laser can be used in scientific research, production testing and other fields. It is an ideal light source for optical fiber sensing and optical device testing. It can provide various module packages according to customer requirements.

DFB laser source (1MHz)

DFB laser source (1MHz)

DFB laser module adopts imported butterfly pump laser, combined with the professional design of the laser drive circuit and TEC control circuit to ensure the safe and stable operation of the laser. This laser can be used in scientific research, production testing and other fields. It is an ideal light source for optical fiber sensing and optical device testing. It can provide various module packages according to customer requirements.

ASE broadband light source (1.0um)

ASE broadband light source (1.0um)

The ASE broadband light source module adopts high-performance ytterbium-doped fiber, combined with optimized optical path structure design and stable laser drive to ensure long-term stable and reliable operation of the light source; it is suitable for applications such as optical fiber sensing and passive device testing. Support PC monitoring, real-time monitoring/configuration module running status.

Narrow Pulse Butterfly Laser Driver

Narrow Pulse Butterfly Laser Driver

The maximum pulse peak current that the drive can provide is ≈ 2A, which may damage the drive. So don't try a peak current higher than 2A. The maximum pulse peak current that the laser can withstand is different, and the proportional relationship between the pulse width and the repetition frequency is relatively large. Usually, when the repetition frequency is low and the pulse width is narrow, the peak current that can be tolerated is greater.

Ultra-narrow linewidth (1KHz) single frequency fiber laser

Ultra-narrow linewidth (1KHz) single frequency fiber laser

The laser adopts a proprietary traveling wave cavity design, with a unique frequency stabilization technology, so that the laser maintains a single longitudinal mode, ultra-low relative intensity noise and phase noise high-performance stable output, the module adopts a proprietary shockproof noise reduction design, with stable low noise control circuit, to ensure the high performance and stable operation of the laser.

HY-NLS Series Narrow Linewidth Fiber Laser Modules

HY-NLS Series Narrow Linewidth Fiber Laser Modules

The HY-NLS series narrow linewidth fiber laser module adopts high-performance distributed feedback resonator and packaging technology. The laser output guarantees a stable single longitudinal mode, the linewidth is less than 3KHz, and the output power is> 10mW. It is suitable for distributed optical fiber sensing, interference sensing, coherent optical communication, laser radar and other fields.

HY-DML Series 1310nm High Bandwidth Direct-adjustable Light Source

HY-DML Series 1310nm High Bandwidth Direct-adjustable Light Source

HY-DML series 1310nm high bandwidth direct dimming source integrates 1310nm direct modulation DFB laser, drive circuit and temperature control circuit. The light source has 10GHz high modulation bandwidth, excellent mode stability, low relative intensity noise and good output optical power stability. The high bandwidth and high sensitivity of RF signal modulation make HY-ELD-13 products the best choice for analog RF signal direct modulation light sources.

ELD Series 905nm Direct-modulation Light Source Module

ELD Series 905nm Direct-modulation Light Source Module

The HY-ELD direct modulation laser module integrates high power laser diode, driving circuit and temperature control circuit. The module has 20Mbit/s modulation rate, excellent mode stability, low relative intensity noise and good output optical power stability. It can be used in the field of space optical communication and digital communication.

DML Series 1550nm High Bandwidth Directly Modulation Laser Module

DML Series 1550nm High Bandwidth Directly Modulation Laser Module

HY-DML series 1550nm analog broadband direct modulation laser module adopts highly linear microwave direct modulation DFB laser (DML), fully transparent working mode, without RF drive amplifier, and integrates automatic power control (APC) and automatic temperature control (ATC) circuits, ensuring that the laser can transmit microwave RF signals up to 18GHz with long distance, high bandwidth and flat response, provides superior performance linear fiber optic communications for a variety of analog broadband microwave applications. Due to avoid the use of expensive coaxial cable or waveguide, the transmission distance limit is canceled, greatly improving the signal quality and reliability of microwave communication, can be widely used in long-range wireless, timing and reference signal distribution, telemetry and delay line microwave communication field.

HY-PLS Series Nanosecond Pulse Light Source

HY-PLS Series Nanosecond Pulse Light Source

The HY-PLS series pulse light source uses a unique short pulse drive circuit to achieve the narrowest pulse output of up to 3ns. At the same time, it uses a high-stability laser and a unique APC (automatic power control) and ATC (automatic temperature control) circuit to make the output power and wavelength have a high degree of stability, and can monitor the light source temperature, power and other information in real time. This series of pulse light source is mainly used for MOPA structure fiber laser seed source, spectral analysis, fiber sensing, passive device testing.

HY-PLS Series 905nm Pulse Light Source

HY-PLS Series 905nm Pulse Light Source

HY-PLS series pulse light source uses a unique short pulse drive circuit to achieve pulse output, laser unique APC (automatic power control) and ATC (automatic temperature control) circuit, so that the output power and wavelength has a high degree of stability.

HY-PLS-08 type 850nm nanosecond pulse light source

HY-PLS-08 type 850nm nanosecond pulse light source

HY-PLS series 850nm nanosecond pulse light source uses a unique short pulse drive circuit to achieve the narrowest pulse output of up to 3ns. At the same time, it uses a highly stable laser and unique APC (automatic power control) and ATC (automatic temperature control) circuits to make the output power and wavelength have high stability, and can monitor the light source temperature, power and other information in real time. This series of pulse light source is mainly used for MOPA structure fiber laser seed source, spectral analysis, fiber sensing, passive device testing.

Message consultation

We will surprise you with a gift as soon as we receive your message.

Submit Message

Cookie

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

Cookie

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Contact Information

Contact Phone

+86 13007196908

E-mail: sales@fiberlink.com.cn

Address: Building 1, No. 12 Miaoshan East Road, Jiangxia District, Wuhan, Hubei Province, 430073 P.R China